Our silencers do not tinkle when colliding with tree branches in the forest.
Not suitable for full automatic weapon because of material.
- 5.7mm / .222 / .223rem
- Up to 6.5x 55 Mauser
- Up to 7.62 / .30(not suitable for .300WM/.338LM)
- Up to 9.3x 62
Thread options also with SAKO type: 1/2-20UNF, 1/2-28UNEF, M14x1, M15x1 with short Spigot (like the drawing below), M17x1, M18x1, 5/8-24, blanco (for making same thread than there is already on rifle's barrel, for example 5/8-18, etc).
- Length 85 mm/65, weight 260 g
- Length 105 mm/80, weight 310 g
- Length 125 mm/105, weight 360 g
- Length 145 mm/125, weight 400 g
- Length 165 mm/145, weight 450 g
Material: aluminium frame, cannot be disassembled
Diameter: 52 mm
Warranty: 2 years
Barrel thread for Ultra Alfa and for Alfa
Mounting Alfa and Ultra Alfa silencers
Make threading and spigot (if there is a spigot, normally our models are without spigot) (like drawing shows) always with silencer and nut. Try that silencer and threading nut go to the threading lightly. Please notice that (you can have Ultra Alfa with straight or with slanting hole) if last hole is slanting so that the recoil presses barrel down after shooting. And it also raises the nose of the gunshot to go up ( your dog likes that). Place the hole to point 12 clock by machining the endcut more if you need.